Hardware and software requirement

Hardware	Software
AC500 PLCs: PM5630-2ETH, PM5650-2ETH, PM5670-2ETH and PM5675-2ETH AC500-eCo PLCs: PM5012-x-ETH PM5032-x-ETH PM5052-x-ETH and PM5072-T-2ETH PM5082-T-2ETH ^*)	Automation Builder 2.2. or higher
ABB drive: ACS380, ACS480, ACS580, ACH580, ACQ580, ACS880, ACSM1, DCS550, DCS800, DCS880. (Other drives may work, but are not tested.)	Drive Composer Pro, Drive Studio, Drive Window or Drive Window Light
Fieldbus adapter module: FSCA-01, RMBA-01 FENA-01 / FENA-11 / FENA-21, RETA-01, FPNO-21, FMBT-21 FECA-01, RETA-02 FCAN-01, RCAN-01 (Other fieldbus adapter modules may work, but are not tested.)
Remarks: ^*): from ≥ AB 2.6.1 and CPU FW ≥ 3.6.2

Hardware

Software

AC500 PLCs:

PM5630-2ETH,

PM5650-2ETH,

PM5670-2ETH and

PM5675-2ETH

AC500-eCo PLCs:

PM5012-x-ETH

PM5032-x-ETH

PM5052-x-ETH and

PM5072-T-2ETH

PM5082-T-2ETH ^*)

Automation Builder 2.2. or higher

ABB drive:

ACS380, ACS480, ACS580, ACH580, ACQ580,

ACS880, ACSM1, DCS550, DCS800, DCS880.

(Other drives may work, but are not tested.)

Drive Composer Pro,

Drive Studio,

Drive Window or

Drive Window Light

Fieldbus adapter module:

FSCA-01, RMBA-01

FENA-01 / FENA-11 / FENA-21, RETA-01,

FPNO-21, FMBT-21

FECA-01, RETA-02

FCAN-01, RCAN-01

(Other fieldbus adapter modules may work, but are not tested.)

Remarks:

^*): from ≥ AB 2.6.1 and CPU FW ≥ 3.6.2

Before adding a drive to the device tree, the correct device description file has to be installed into Automation Builder’s device repository. For ABB drives the corresponding device descriptions are ‎⮫ available for download from our webside. For ABB drives connected via CANopen or EtherCAT there is also the option to generate the device descriptions via Drive Composer Pro (“Tools EDS Export”).

Drive configuration tool and fieldbus adapter module support is dependent on the drive used, for the compatible tool details refer to the drive manual.