Only advanced users should apply the instructions in this chapter.
|
[FirmwareUpdate] |
0 = No update |
|
CPUFW=x x= 0, 11, 12, 13 |
11 = Update system firmware using the file specified in module section [CPU] and the component path key “CPUFW”. |
|
12 = Update with a different version; performed only if the specified version of the file specified by the component path key “CPUFW” in the module section [CPU] differs from the current version of the CPU. 13 = Update with newer version, performed only if the version of the file specified by the component path key “CPUFW” in module’s section [CPU] is newer than the current version of the CPU. |
|
|
BootFW=x x= 0, 11, 12, 13 |
See description of CPUFW. The component path key for the boot firmware in the module section [CPU] is “BootFW”. |
|
UpdateFW=x x= 0, 11, 12, 13 |
See description of CPUFW. The component path key for the update firmware in the module section [CPU] is “UpdateFW”. |
|
DisplayFW=x x= 0, 11, 12, 13 |
See description CPUFW. The component path key for the display firmware in the module section [CPU] is “DisplayFW”. |
|
UpdateHook=x x= 0, 11 |
11 = Execute UpdateHook using the file specified in the module section [CPU] and the component path key “UpdateHook”. |
|
ImportLicense=x x= 0, 12 |
12 = Import the license using the file specified in the module section [CPU] and the component path key “ImportLicense”. The license file is a Wbb or WibuCmRaU file. The update process imports this file into the PLC. Note: Do not use parameter 11 for license import. |
|
ExportLicense=x x= 0, 12 |
12 = Export the license to the file specified in the module section [CPU] and the component path key “ExportLicense”. The exported license file is a WibuCmRaC file. Note: Do not use parameter 11 for license export. |
|
Coupler0=x x= 0, 11, 12, 13 |
0 = No update. 11 = Update firmware using the file specified in the module section [Coupler0] and the component path key “Boot” and/or “Firmware”. 12 = Update with different version; the update is only performed if the version of the file specified by the component path key “Boot” and/or “Firmware” in the module section [Coupler0] differs from the current version of the communication module. 13 = Update with newer version; the update is only performed if the version of the file specified by the component key “Boot” and/or “Firmware” in the module section [Coupler0] is newer than the current version of the communication module. |
|
Coupler1=x x= 0, 11, 12, 13 |
Update module slot 1; see description Coupler0, module section is [Coupler1]*. |
|
Coupler2=x x= 0, 11, 12, 13 |
Update module slot 2; see description Coupler0, module section is [Coupler2]*. |
|
Coupler3=x x= 0, 11, 12, 13 |
Update module slot 3; see description Coupler0, module section is [Coupler3]*. |
|
Coupler4=x x= 0, 11, 12, 13 |
Update module slot 4; see description Coupler0, module section is [Coupler4]*. |
|
Coupler5=x x= 0, 11, 12, 13 |
Update module slot 5; see description Coupler0, module section is [Coupler5]*. |
|
Coupler6=x x= 0, 11, 12, 13 |
Update module slot 6; see description Coupler0, module section is [Coupler6]*. |
|
[UserProg] |
0 = No update. |
|
UserProgram=x x= 0, 11 |
11 = Update user program always with the file specified in the module section [CPU] and component path key “UserProgram”. |